
Fire safety
Fire Alarm Certificate & Testing
Fire Alarm System Testing and Safety Certification. Fire alarm testing and certification to BS 5839 for landlords and businesses.
- How often
- Weekly test + 6-monthly service
- Valid for
- Up to 6 months
- Time on site
- Depends on system size
- Standard
- BS 5839-1 / BS 5839-6
About the service
Fire Alarm System Testing
Fire alarm systems are critical safety features that require regular testing and certification to ensure reliable operation during emergencies. Our comprehensive testing follows BS 5839 standards to maintain optimal fire detection and alarm capabilities.
Professional fire alarm testing includes inspection of detection devices, control panels, sounders, and communication systems to verify proper functionality and compliance with fire safety regulations.
What's included
- Control panel and fault log review
- Smoke, heat and multi-sensor detectors
- Manual call points
- Sounders and visual alarm devices
- Battery and standby power checks

Fire alarm requirements
Landlords of HMOs and blocks of flats, managing agents, and the responsible person for commercial premises who must show that the fire detection and alarm system is maintained.
- 1The Regulatory Reform (Fire Safety) Order 2005 requires the responsible person for non-domestic premises, and the common parts of flats and HMOs, to keep fire safety systems maintained in good working order.
- 2The Smoke and Carbon Monoxide Alarm (England) Regulations 2015, as amended in 2022, require a smoke alarm on every storey used as living accommodation, and a carbon monoxide alarm in any room with a fixed combustion appliance (excluding gas cookers).
- 3BS 5839-1 sets the standard for testing and servicing fire detection and alarm systems in non-domestic buildings; BS 5839-6 covers domestic premises.
- 4Fire alarm systems should be tested weekly by the user and inspected and serviced by a competent engineer at intervals not exceeding 6 months (BS 5839-1).
How it works
Fire Alarm Testing Process
Comprehensive system testing following BS 5839 standards
- 01
System Inspection
Visual inspection of control panels, detectors, call points, and alarm devices throughout the property.
- 02
Function Testing
Testing of detection devices, alarm sounders, and communication systems for proper operation.
- 03
Zone Testing
Individual zone testing and verification of cause and effect programming for all areas.
- 04
Certificate Issue
Fire alarm test certificate issued with detailed test results and maintenance recommendations.
Book online
Book your Fire Alarm Certificate
Tell us about the property and pick a date. Add any other certificates you need to the same visit.
- Secure
- Fast Response
- Certified
- No Obligation
Step 1 / 4
Where is the property?
The address our engineer will visit, and how to reach you.

Why Landlord Safety
Why landlords choose us
Stress-free compliance from certified engineers. Clear reports, on-time visits and certificates issued within 24 hours of inspection.
- BS 5839 & BS 5266 trained
- Fully insured
- Certificates within 24 hours
- Same-day slots

Save a visit
Fire Alarm Certificate + Emergency Lighting Certificate
Many landlords book these together. Emergency lighting testing and certification to BS 5266. Combine both in one booking and our engineers can cover them in a single visit where possible.
Also popular: EICR Certificate · Gas Safety Certificate
Accredited & certified
Our accreditations
Every engineer is registered with the UK’s leading safety and quality schemes.
- Gas Safe Register
- NAPIT
- MCS Certified
- Quality Mark Protection Accredited
- HIES Consumer Code
- Installation Assurance Authority
FAQ
Fire Alarm Certificate questions
Fire alarm systems should be tested weekly using a different call point each time, and inspected and serviced by a competent engineer at least every 6 months under BS 5839-1. Emergency lighting needs a monthly functional test and an annual full-duration test.
Most HMOs require a mains-wired, interlinked fire alarm system, and licensing authorities usually ask for an up-to-date fire alarm test certificate as part of the HMO licence.
A residential fire alarm certificate costs £120 and a commercial fire alarm certificate costs £360. Final prices may vary depending on property location.

Need Fire Alarm Testing?
Ensure reliable fire detection and early warning with our professional fire alarm certification service.



